/
7. Setup Decoders (Direct to Decoder)
7. Setup Decoders (Direct to Decoder)
Go to Settings > Services
Once you set your network right, you can see your decoders here.
Select your decoder(s).
Tick your loop(s).
Once you connect your decoder(s), go to Score.
If you don't have GPS for your decoder(s), Sqorz advise you to "Synchronise" the decoder time to your PC time. Click "Synchronise".
Synchronised.
Now you can see the passings data in Timing Data.
- Click "Show".
- Check if you can see all "Start", "Hill" and "Finish" data are coming into Sqorz.
, multiple selections available,
Related content
3. Import Member Database
3. Import Member Database
Read with this
7-1-b. 1 Decoder: Setup timing - Settings
7-1-b. 1 Decoder: Setup timing - Settings
More like this
16. Training: how to set it up
16. Training: how to set it up
More like this
7A. Setup Checking Station (Self Service Centre)
7A. Setup Checking Station (Self Service Centre)
More like this
MYLAPS Timing System Check — 3 mins
MYLAPS Timing System Check — 3 mins
More like this
7-2-a. 2 Decoders: Setup Mylaps Timing & Scoring
7-2-a. 2 Decoders: Setup Mylaps Timing & Scoring
More like this